UK Sponsor List

SOC Code 5213: Welding trades

Is job code 5213 eligible for a Skilled Worker visa? Eligibility, going rate, minimum salary, dependants and the job titles it covers.

SOC code 5213 at a glance

OccupationWelding trades
Skill levelRQF 3–5 (Medium Skilled)
Skilled Worker eligible?Yes, via the Immigration Salary List
Shortage listsImmigration Salary List (until 31 December 2026); Temporary Shortage List (CoS before 31 December 2026)
Salary£34,900 going rate; minimum £34,900 (ISL)
Can bring dependants?No, for new applicants
Example job titlesBraziers and solderers, Pipe welders, Plate welders

Occupation code 5213 — also called the SOC code or job code — covers welding trades. On the UK Skilled Worker route this code is classed as Medium Skilled, with a standard going rate of £34,900.

Is code 5213 eligible for sponsorship?

Occupation code 5213 is classed as Medium Skilled (RQF levels 3–5). Since 22 July 2025 most Medium Skilled jobs can no longer be sponsored — but this code is on the Immigration Salary List, so employers can still sponsor new applicants for it until 31 December 2026.

Immigration Salary List: code 5213 is on the ISL across the UK for Certificates of Sponsorship issued before 31 December 2026. Condition: only high integrity pipe welders, where the job requires 3 or more years’ related on-the-job experience. This experience must not have been gained through working illegally. ISL jobs qualify with a salary of at least £33,400, provided the full going rate is also met, and pay a reduced visa fee.

Temporary Shortage List: code 5213 is on the TSL, so it can be sponsored for new applicants as long as the Certificate of Sponsorship is issued before 31 December 2026. The TSL makes the job eligible but does not lower the salary requirement.

Workers sponsored in RQF 3–5 jobs through the shortage lists cannot bring dependants. The lists are also temporary: this code drops off for certificates issued on or after 31 December 2026 unless the government extends it, so check the position before your sponsor assigns the certificate. See what happens when the shortage lists end on 31 December 2026.

Salary requirement for code 5213

Your situationMinimum salary
General salary threshold (most new applicants)£41,700
Standard going rate for code 5213£34,900 (£17.9/hour)
Immigration Salary List (threshold £33,400 + full going rate)£34,900
New entrant: under 26, recent Student/Graduate visa holder or in professional training (70% of going rate, at least £33,400)£33,400
First sponsored before 4 April 2024 (going rate £29,500, at least £31,300)£31,300

What you must actually be paid

On the standard rules you must meet both the £41,700 general threshold and the going rate — whichever is higher applies. For occupation code 5213 that means a minimum of £41,700 a year, set by the general salary threshold. The discounted rows above apply only if you fit that situation.

Because code 5213 is on the Immigration Salary List, a new applicant needs at least £34,900 — the £33,400 ISL threshold or the full going rate, whichever is higher.

Only guaranteed basic gross pay counts. Overtime, bonuses, tips, allowances and the value of benefits such as accommodation are excluded. Going rates are quoted for a 37.5-hour week and are pro-rated for different hours. See how salary thresholds work.

Going rates change when the Immigration Rules do

Get a short email when the Home Office changes salary thresholds, going rates or the occupation lists, so you know when code 5213 is affected. No spam, unsubscribe any time.

Can you bring dependants on code 5213?

No, for new applicants. Since 22 July 2025, people sponsored in RQF 3–5 jobs through the shortage lists — such as code 5213 — cannot bring a partner or children. Only workers who were already sponsored in a Medium Skilled job before that date, and have stayed in the route since, keep that right. Check the dependant rules and fees before you commit.

What the job involves

Welding trades workers join metal parts by welding, brazing and soldering, and cut and remove defects from metal using a variety of equipment and techniques.

Typical tasks, as the ONS defines the occupation:

  • Selects appropriate welding equipment such as electric arc, gas torch, etc.
  • Connects wires to power supply, or hoses to oxygen, acetylene, argon, carbon dioxide, electric arc, or other source and adjusts controls to regulate gas pressure and rate of flow
  • Cuts metal pieces using gas torch or electric arc
  • Guides electrode or torch along line of weld, burns away damaged areas, and melts brazing alloy or solder into joints
  • Cleans and smooths weld
  • Checks finished workpiece for defects and conformity with specification

Typical entry routes: Entrants typically possess GCSEs/S grades. Training is typically by apprenticeship incorporating practical experience and technical training. NVQs/SVQs at levels 1, 2 and 3 and apprenticeships are available. Welders must normally pass a competency test in the particular type of welding to be carried out.

Match on these duties, not on your job title: the Home Office checks that the role genuinely fits the code on the Certificate of Sponsorship.

Job titles under code 5213

GOV.UK lists the following related job titles for occupation code 5213. Your employer should choose the code that matches your actual duties, not your job title — different employers use different titles for the same work.

  • Braziers and solderers
  • Pipe welders
  • Plate welders
  • Welding trades not elsewhere classified

All 52 job titles the ONS maps to code 5213

The ONS coding index — the list Home Office caseworkers and employers use to place a job title in a code — maps these titles to 5213. A title in brackets shows the industry it applies to.

  • Engineer (welding)
  • Fitter-welder
  • Welder
  • Welder-fitter
  • Welding engineer
  • Acetylene burner
  • Acetylene cutter
  • Arc welder
  • Blacksmith welder
  • Brazer
  • Brazier
  • Brazing machinist
  • Burner (coal mine; demolition; metal trades; railways)
  • Case solderer and jointer
  • Chain jointer
  • Chain welder
  • Chassis builder
  • Co2 welder
  • Coded welder
  • Cutter (boiler mfr; shipbuilding)
  • Deseamer
  • Deseaming operator
  • Electric welder
  • Fabrication welder
  • Fabricator welder
  • Fabricator-welder
  • Flame cutter
  • Flame dresser
  • Gas burner (building construction)
  • Gas cutter
Show the other 22 job titles
  • Lead burner
  • Maintenance welder
  • Mig welder
  • Oxy-acetylene burner
  • Oxy-acetylene cutter
  • Pipe welder
  • Profile burner
  • Scarfer
  • Scrap burner (steelworks)
  • Scrap cutter
  • Scrap metal cutter
  • Solderer (jewellery, plate mfr; metal trades)
  • Soldering machinist
  • Spot welder
  • Steel cutter
  • Sweater (metal trades)
  • Thermic lancer
  • Welder and cutter
  • Welder's assistant
  • Welder-fabricator
  • Welding plant attendant
  • Welding technician

Which employers can sponsor this role?

Any employer holding a Skilled Worker sponsor licence can sponsor an eligible occupation — the licence is not granted per occupation code. What you need to check is that the employer appears on the Home Office register with the Skilled Worker route and an A rating.

Search over 125,000 licensed sponsor records on the UK sponsor list, filter by town on sponsors by city, or check a specific employer in the A–Z company directory.

Related occupation codes

Other codes in the same skilled trades occupations group:

Sources: Immigration Rules on GOV.UK — Appendix Skilled Occupations, Appendix Immigration Salary List and Appendix Skilled Worker (Temporary Shortage List) — checked on 16 October 2026; job titles, tasks and entry routes from the Office for National Statistics, SOC 2020 coding index version 14 (27 August 2026), and SOC 2020 Volume 1, used under the Open Government Licence v3.0. This is general information, not legal advice — confirm the current position on GOV.UK before applying.

Frequently asked questions

What is job code 5213?

5213 is the SOC (Standard Occupational Classification) code for welding trades. UK employers put it on a Certificate of Sponsorship to identify the job being sponsored.

Is occupation code 5213 eligible for the Skilled Worker visa?

Yes, for now. Code 5213 is Medium Skilled (RQF 3–5) but on the Immigration Salary List, so it can be sponsored for Certificates of Sponsorship issued before 31 December 2026 (condition: only high integrity pipe welders, where the job requires 3 or more years’ related on-the-job experience. This experience must not have been gained through working illegally.).

What is the minimum salary for SOC code 5213?

The going rate for code 5213 is £34,900 a year. You must be paid at least the going rate or the general threshold of £41,700, whichever is higher — so a minimum of £41,700 for a standard application. Because the code is on the Immigration Salary List, the threshold drops to £33,400, giving a minimum of £34,900. New entrants (for example under 26 or switching from a Student or Graduate visa) need at least £33,400.

Can I bring dependants with job code 5213?

No, for new applicants. Since 22 July 2025, workers sponsored in RQF 3–5 jobs through the shortage lists, such as 5213, cannot bring dependants unless they were already in the Skilled Worker route before that date.

What job titles come under SOC code 5213?

GOV.UK lists these related job titles for code 5213: Braziers and solderers, Pipe welders, Plate welders. The ONS coding index maps 52 job titles to code 5213, including Engineer (welding), Fitter-welder, Welder, Welder-fitter, Welding engineer, Acetylene burner, Acetylene cutter, Arc welder.

UK Sponsor List app: check your occupation code, salary threshold and visa cost on your phone. Free on iPhone and Android.